1. Inverter technology for DC welding of all type of electrodes
(Rutile, Basic, stainless steel, cast iron).
2. Easy to use due to a light weight, a small volume and a low
3. Insensitive with the fluctuations of the current or the length
of Arc continuous welding power.
4. High welding current stability.
5. Very soft fusion dute to its DC current.
6. Super strong electricity network compensation capabiliby,
resistant to voltage pulsation, stable and reliable welding
curr-ent; Protected against over voltage and under voltage(+/-15%).
7. Very good penetration and perfect stability of the arc.
8. Possibility to use with scratch TIG.
9. Broadly used in the welding and field operation of oil popeline
/chemical industry/car/shipbuilding/boiler/power station
installation bridge construction, ect;
NOTE: To ensure safe operation, Before welding users must start the
machine at the current below 80A for a while(At least 2minutes).
After the machine is Completely heated up, Then gradually adjust
the Current to the required level.
Electric Welding Machine (XA180Z) Images